IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
(b) Apply a light coat of engine oil to the bolt threads and bolt-seating surface.
(c) Align the knock pin of the camshaft with the pin hole of the camshaft timing gear assembly. Install the camshaft timing gear assembly and
camshaft timing exhaust gear assembly with the No. 2 chain sub-assembly installed.
(d) Using SST to hold the hexagonal portion of each camshaft, tighten the flange bolts of the camshaft timing gear assembly and the camshaft
timing exhaust gear assembly RH.
SST : 09922-10010
Text in Illustration
Torque : 100 Nm (1020 kgf-cm, 74 ft-lbf)
(e) Remove the pin from the No. 2 chain tensioner assembly.
25. INSTALL CHAIN SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
26. INSTALL CHAIN TENSIONER SLIPPER See: Service and Repair/Overhaul/Reassembly
27. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY See: Service and Repair/Overhaul/Reassembly
28. INSPECT VALVE TIMING See: Service and Repair/Overhaul/Reassembly
29. INSTALL TIMING CHAIN CASE OIL SEAL See: Service and Repair/Overhaul/Reassembly
30. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY
HINT
See the steps from "Timing Chain Cover Sub-Assembly" through "Install Engine And transmission Assembly" See: Engine
Lubrication/Oil Pump/Service and Repair/Removal and Replacement/Installation.