IS 250C V6-2.5L (4GR-FSE) (2011)
Center Mounted Brake Lamp: Service and Repair
Installation
LIGHTING (EXT): HIGH MOUNTED STOP LIGHT ASSEMBLY: INSTALLATION
1. INSTALL CENTER STOP LIGHT ASSEMBLY
(a) Engage the pin.
(b) Install the center stop light assembly with the 4 nuts.
Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)
(c) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly