IS 250C V6-2.5L (4GR-FSE) (2011)
Console Lamp: Component Tests and General Diagnostics
Personal Light
LIGHTING (INT): PERSONAL LIGHT: INSPECTION
1. INSPECT MAP LIGHT ASSEMBLY (PERSONAL LIGHT)
(a) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 16.
(b) Check that the personal light comes on as shown in the table below.
OK:
Text in Illustration
If the result is not as specified, replace the bulb or map light assembly.
Console Box Light
LIGHTING (INT): CONSOLE BOX LIGHT: INSPECTION
1. INSPECT CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY
(a) Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
(b) Check that the console box illumination light comes on.
OK:
Comes on
Text in Illustration