IS 250C V6-25L (4GR-FSE) (2011) Headlamp Alignment Control Module Repair
Headlamp Alignment Control Module: Service and Repair
Installation
LIGHTING (EXT): HEADLIGHT LEVELING ECU: INSTALLATION
1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY
(a) Connect the connector.
(b) Install the headlight leveling ECU assembly with the bolt and nut.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
3. INSTALL FRONT FLOOR FOOTREST LH See: Body and Frame/Interior Moulding / Trim/Foot Rest/Service and Repair/Installation
4. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation
5. INSTALL DOOR SCUFF PLATE ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Installation
6. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT See: Headlamp/Adjustments
7. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) See: Headlamp/Adjustments
8. PREPARATION FOR HEADLIGHT AIMING (Using a screen) See: Headlamp/Adjustments
9. INSPECT HEADLIGHT AIMING See: Headlamp/Adjustments
10. ADJUST HEADLIGHT AIMING See: Headlamp/Adjustments