IS 250C V6-2.5L (4GR-FSE) (2011)
Turn Signal Lamp: Service and Repair
Removal
LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: REMOVAL
1. REMOVE OUTER REAR VIEW MIRROR GLASS See: Body and Frame/Mirrors/Service and Repair/Removal and Replacement/Outer Rear
View Mirror Glass/Removal
2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) Remove the 4 screws.
(b) Disengage the 3 claws and 3 guides, and remove the visor rim.
(c) Disengage the 2 guides.
(d) Remove enough of the adhesive tape to allow the wire harness to be removed.
(e) Disconnect the connector and remove the visor cover with the side turn signal light assembly.
(f) Remove the 2 screws.
(g) Disengage the 2 guides and remove the plating visor with the side turn signal light assembly.
(h) Disengage the 2 claws and remove the side turn signal light assembly from the plating visor.