IS 250C V6-2.5L (4GR-FSE) (2011)
HINT
*
DTC communication uses the CAN communication system.
*
Distance control ECU data is also output.
*1: The ECM is malfunctioning if U0101 is output. Replace the ECM.
*2: If U0235 or U1102 is output alone, the CAN communication is normal See: Testing and Inspection/Diagnostic Trouble Code Tests
and Associated Procedures/U Code Charts/U0235 for U0235, See: Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/U Code Charts/U1102 for U1102).
*3: Dynamic radar cruise DTC
(b) ECM/Techstream display "ECT"
HINT
*
DTC communication uses the CAN communication system.
*
*1: The ECM is malfunctioning if U0100 is output. Replace ECM.
(c) Skid Control ECU/Techstream display "ABS/VSC/TRAC"
HINT
DTC communication uses the CAN communication system.
(d) Power Steering ECU/Techstream display "EPS"
HINT
DTC communication uses the CAN communication system.
(e) Seat Belt Control ECU/Techstream display "Pre-Collision"
HINT
DTC communication uses the CAN communication system.
(f) Navigation ECU/Techstream display "AVN1"