IS 250C V6-2.5L (4GR-FSE) (2011)
Canister Purge Control Valve: Service and Repair
Installation
4GR-FSE EMISSION CONTROL: PURGE VALVE: INSTALLATION
1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY
(a) Install the No. 1 vacuum switching valve assembly with the bolt.
Torque : 18 Nm (182 kgf-cm, 13 ft-lbf)
(b) Connect the 2 fuel vapor feed hoses and connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation