IS 250C V6-2.5L (4GR-FSE) (2011)
Evaporative Emission Control Canister: Service and Repair
Removal
4GR-FSE EMISSION CONTROL: CANISTER: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY
(a) Disconnect the 3 grommets and remove the 6 clips and rear No. 1 floor board sub-assembly.
3. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Disconnect the wire harness from the 2 clamps.
(b) Disconnect the 2 quick connectors, hose and connector.
(c) Remove the 4 nuts, 2 clips and charcoal canister assembly.