IS 250C V6-2.5L (4GR-FSE) (2011)
NOTICE:
*
Pull and remove the injector in a straight line to avoid damage to the seal surface of the delivery pipe O-ring.
*
For reinstallation, attach a tag or label to the injector shaft.
(b) Remove the nozzle holder clamps from the injectors.
(c) Remove the O-ring, backup rings and E-ring from the fuel injector.
15. REMOVE FUEL INJECTOR SEAL
(a) Using the tips of a pair of needle nose pliers, pinch and pull one of the 2 injector seals at several points to stretch it. Repeat this for the other
injector seal.
NOTICE:
*
Excessively pinching the injector seal may damage the groove of the injector.
*
If an injector is dropped or the tips of the injectors are struck, replace it with a new one.
(b) Remove the 2 injector seals from the injector.