IS 250C V6-2.5L (4GR-FSE) (2011)
Standard:
NOTICE:
*
Be sure to perform this step with all accessories off.
*
Make sure that the shift lever is in neutral.
(e) Enter the following menus: Powertrain / Engine / Data List / All Data / Throttle Sensor Position. Sensor Output. Fully depress the accelerator
pedal and check that the value is 60% or more.
(f) Perform a road test and confirm that there are no abnormalities.
8. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
9. INSTALL ENGINE ROOM SIDE COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
10. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation