IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-762001.png)
Camshaft Position Sensor: Service and Repair
Installation
4GR-FSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION
1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
(a) Install the VVT sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the VVT sensor connector.
2. INSTALL VVT SENSOR (for Intake Side of Bank 2)
(a) Install the VVT sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the VVT sensor connector.
3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
(a) Install the VVT sensor with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the VVT sensor connector.
4. INSTALL VVT SENSOR (for Intake Side of Bank 1)
(a) Install the VVT sensor with the bolt.
