IS 250C V6-2.5L (4GR-FSE) (2011)
6. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Disengage the 2 claws and remove the pattern select switch from the switch base.
Text in Illustration
Installation
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: PATTERN SELECT SWITCH: INSTALLATION
1. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Engage the 2 claws and install the pattern select switch to the switch base.
Text in Illustration
2. INSTALL SWITCH BASE
(a) Engage the 4 claws and install the switch base to the lower instrument panel finish panel.
Text in Illustration
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
5. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation