IS 250C V6-2.5L (4GR-FSE) (2011)
Air Bag: Testing and Inspection
Front Passenger Airbag Assembly
SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: ON-VEHICLE INSPECTION
CAUTION:
Be sure to follow the correct removal and installation procedures of the front passenger airbag assembly.
1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Visually check for defects with the front passenger airbag assembly installed on the vehicle.
(1) The defects are as follows:
Cuts on the instrument panel around the front passenger airbag assembly
Small cracks on the instrument panel around the front passenger airbag assembly
Significant discoloration on the instrument panel around the front passenger airbag assembly
OK:
No defects are found.
HINT
If any of the defects is found, replace the instrument panel with a new one.
2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Visually check for defects with the front passenger airbag assembly removed from the vehicle.
(1) The defects are as follows:
Cuts on the front passenger airbag assembly
Small cracks on the front passenger airbag assembly
Significant discoloration on the front passenger airbag assembly
Cracks or other damage to the connector
Deformation or cracks on the instrument panel or instrument panel reinforcement
OK:
No defects are found.
HINT
If any of the defects is found, replace the front passenger airbag assembly, instrument panel or instrument panel reinforcement with a
new one.