IS 250C V6-2.5L (4GR-FSE) (2011)
Steering Angle Sensor: Service and Repair
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSTALLATION
1. INSTALL STEERING ANGLE SENSOR
(a) Align the locating pins, engage the 6 claws and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR See: Restraint Systems/Air Bag Systems/Clockspring
Assembly / Spiral Cable/Service and Repair/Installation
3. INSTALL STEERING COLUMN COVER (for Upper Side) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Installation
4. INSTALL STEERING COLUMN COVER (for Lower Side) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Installation
5. TURN FRONT WHEELS FACING STRAIGHT AHEAD
6. ADJUST SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Installation
7. INSTALL STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Installation
8. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
9. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
10. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Installation
11. INSPECT STEERING WHEEL CENTER POINT
(a) Inspect the steering wheel center point.
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Installation
14. INSPECT SRS WARNING LIGHT
HINT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System