IS 250C V6-2.5L (4GR-FSE) (2011)
Engine Temperature Sensor: Service and Repair
Installation
4GR-FSE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install a new gasket to the engine coolant temperature sensor.
(b) Install the engine coolant temperature sensor.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL INTAKE MANIFOLD
(a) Install the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Installation.