IS 250C V6-2.5L (4GR-FSE) (2011)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL
1. REMOVE FRONT BUMPER ASSEMBLY
HINT
Refer to the procedure up to Remove Front Bumper Assembly See: Body and Frame/Bumper/Front Bumper/Service and
Repair/Removal and Replacement/Removal.
2. REMOVE ENGINE ROOM SIDE COVER LH (w/ No. 2 Air Conditioning Pressure Sensor) See: Wiper and Washer Systems/Wiper
Motor/Service and Repair/Removal
3. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Heating and Air Conditioning/Service and Repair
4. REMOVE NO. 1 AIR CONDITIONING PRESSURE SENSOR
(a) Disconnect the connector.
(b) Remove the No. 1 air conditioning pressure sensor.
5. REMOVE NO. 2 AIR CONDITIONING PRESSURE SENSOR (w/ No. 2 Air Conditioning Pressure Sensor)
(a) Disconnect the connector.
(b) Remove the No. 2 air conditioning pressure sensor.