IS 250C V6-2.5L (4GR-FSE) (2011)
Camshaft Position Sensor: Service and Repair
Removal
4GR-FSE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE VVT SENSOR (for Intake Side of Bank 1)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
4. REMOVE VVT SENSOR (for Intake Side of Bank 2)
(a) Disconnect the VVT sensor connector.
(b) Remove the bolt and VVT sensor.
5. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)
(a) Disconnect the VVT sensor connector.