IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-469002.png)
(b) Remove the bolt and transmission revolution sensor.
(c) Remove the O-ring from the transmission revolution sensor.
Installation
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: INSTALLATION
1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2 SENSOR)
(a) Coat a new O-ring with ATF and install it to the transmission revolution sensor.
Text in Illustration
(b) Install the transmission revolution sensor with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission revolution sensor connector.
2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT SENSOR)
(a) Coat a new O-ring with ATF and install it to the transmission revolution sensor.
Text in Illustration
(b) Install the transmission revolution sensor with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission revolution sensor connector.
