IS 250C V6-2.5L (4GR-FSE) (2011)
Wiper Switch: Service and Repair
Installation
WIPER / WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
(b) Connect the 2 connectors.
2. INSTALL STEERING COLUMN COVER
(a) Engage the 3 claws and 4 clips to install the upper steering column cover.
(b) Engage the 2 claws and install the lower steering column cover.
NOTICE:
Do not damage the tilt and telescopic switch.
(c) Install the 3 screws.