IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1360001.png)
Alternator: Removal and Replacement
Replacement
4GR-FSE BATTERY / CHARGING: GENERATOR: REPLACEMENT
1. REPLACE GENERATOR DRIVE END FRAME BEARING
(a) Remove the 4 screws and bearing retainer from the drive end frame.
(b) Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.
SST : 09950-60010
09951-00250
SST : 09950-70010
09951-07100
(c) Using SST and a press, press in a new generator drive end frame bearing.
SST : 09950-60010
09951-00470
SST : 09950-70010
09951-07100
(d) Fit the tabs on the bearing retainer into the cutouts on the drive end frame to install the bearing retainer.
