IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
Torque : 1.8 Nm (18 kgf-cm, 16 in-lbf)
(c) Pull out the pin from the generator brush holder.
5. INSTALL GENERATOR TERMINAL INSULATOR
(a) Install the terminal insulator to the generator coil.
NOTICE:
Pay attention to the installation direction of the terminal insulator.
6. INSTALL GENERATOR REAR END COVER
(a) Install the generator rear end cover to the generator coil with the 3 nuts.
Torque : 4.6 Nm (47 kgf-cm, 41 in-lbf)