IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1373002.png)
(c) Using a screwdriver, pry out the lock washer.
Text in Illustration
(d) Remove the lock nut and lock washer.
(e) Remove the bolt and park/neutral position switch.
Installation
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Install the park/neutral position switch to the manual valve shaft.
(b) Temporarily install the bolt.
(c) Install a new lock washer and the nut.
Text in Illustration
