IS 250C V6-2.5L (4GR-FSE) (2011)
(1) Push in the plunger and check that it returns quickly to its original position.
If necessary, replace the repair service starter kit.
(b) Using an ohmmeter, measure the resistance between terminals 50 and C.
Text in Illustration
Standard Resistance:
If the result is not as specified, replace the repair service starter kit.
(c) Using an ohmmeter, measure the resistance between terminal 50 and the switch body.
Text in Illustration
Standard Resistance:
If the result is not as specified, replace the repair service starter kit.