IS 250C V6-2.5L (4GR-FSE) (2011)
Steering Column Control Module: Service and Repair
Removal
STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU: REMOVAL
1. REMOVE STEERING COLUMN ASSEMBLY
HINT
Refer to the instructions for Removal of the steering column assembly See: Steering/Steering Column/Service and Repair/Removal
and Replacement/Removal.
2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY See: Steering/Steering Column/Service and Repair/Overhaul/Disassembly
3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the connector from the multiplex tilt and telescopic ECU.
(b) Remove the 2 screws and multiplex tilt and telescopic ECU.