IS 250C V6-2.5L (4GR-FSE) (2011)
Front Cross-Member: Service and Repair
Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. REMOVE ENGINE AND TRANSMISSION ASSEMBLY
HINT
Refer to the procedure up to Remove Engine and Transmission Assembly.
*
for 4GR-FSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
*
for 2GR-FSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
2. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
6. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
7. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
8. REMOVE FRONT ENGINE MOUNTING INSULATOR LH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
9. REMOVE FRONT ENGINE MOUNTING INSULATOR LH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
10. REMOVE FRONT ENGINE MOUNTING INSULATOR RH (for 4GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
11. REMOVE FRONT ENGINE MOUNTING INSULATOR RH (for 2GR-FSE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
12. REMOVE FRONT STABILIZER BAR
(a) Remove the 2 nuts and front stabilizer bar.
HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
13. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH
(a) Remove the 2 bolts, 2 washers and 2 nuts, and separate the front lower suspension arm assembly LH.