IS 250C V6-2.5L (4GR-FSE) (2011)
16. REMOVE REAR NO. 1 DISC BRAKE CALIPER PLATE (for LH Side) See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Removal
17. REMOVE REAR NO. 1 DISC BRAKE CALIPER PLATE (for RH Side)
HINT
Perform the same procedure as the LH side.
18. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG (for LH Side)
19. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG (for RH Side)
20. REMOVE REAR DISC (for LH Side) See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Rear
Brake/Removal
21. REMOVE REAR DISC (for RH Side)
HINT
Perform the same procedure as the LH side.
22. SEPARATE REAR SPEED SENSOR LH See: Wheel Hub/Service and Repair/Rear Axle Hub/Removal
23. SEPARATE REAR SPEED SENSOR RH
HINT
Perform the same procedure as the LH side.
24. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the 3 bolts and disengage the 2 clamps.
(b) Separate the No. 3 parking brake cable assembly from the parking brake equalizer.
25. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
Perform the same procedure as the No. 3 parking brake cable assembly.
26. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Control Arm/Service and Repair/Rear Lower Arm/Removal
27. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
28. SEPARATE TOE CONTROL LINK SUB-ASSEMBLY LH See: Wheel Hub/Service and Repair/Rear Axle Hub/Removal