IS 250C V6-2.5L (4GR-FSE) (2011)
(e) Remove the front upper coil spring insulator from the front suspension support assembly.
(f) Remove the front spring bumper from the front suspension support assembly.
(g) Remove the front coil spring and SST.
(h) Remove SST from the front coil spring.
NOTICE:
Do not use an impact wrench. It will damage SST.
(i) Remove the front lower coil spring insulator.
Installation
FRONT SUSPENSION: FRONT SHOCK ABSORBER: INSTALLATION
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure is for the LH side.
1. INSTALL FRONT SHOCK ABSORBER ASSEMBLY
(a) Install the front lower coil spring insulator to the front shock absorber assembly so that both recessed parts are aligned.
Text in Illustration
(b) Using SST, compress the front coil spring.
SST : 09727-30021
09727-00010
09727-00021
09727-00031