IS 250C V6-2.5L (4GR-FSE) (2011)
(1) Remove the 2 bolts and 2 front No. 1 disc brake caliper plates, and separate the front disc brake caliper assembly.
NOTICE:
Use wire or an equivalent tool to keep the front disc brake caliper assembly from hanging down by the flexible hose.
3. REMOVE FRONT DISC
for Floating Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Floating Type Caliper)/Removal
for Opposed Type Caliper See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake (for
Opposed Type Caliper)/Removal
4. REMOVE FRONT AXLE HUB BOLT
(a) Temporarily install 2 nuts to the front axle hub bolt as shown in the illustration.
HINT
Install hub nuts to prevent damage to the hub bolts.
Text in Illustration
(b) Using SST and a screwdriver or an equivalent tool to hold the front axle hub and bearing assembly, remove the front axle hub bolt.
SST : 09628-10011
NOTICE:
Do not damage the threads of the front axle hub bolts.
5. INSTALL FRONT AXLE HUB BOLT
(a) Temporarily install a new front axle hub bolt to the front axle hub sub-assembly.
Text in Illustration
(b) Install a washer and nut to the new front axle hub bolt as shown in the illustration.
HINT
The thickness of the washer is preferably 5 mm (0.197 in.) or more.