IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Check that the fluid comes out of the overflow tube.
Text in Illustration
If fluid does not come out, proceed to the "After Filling Transmission" procedure.
If fluid comes out, wait until the overflow slows to a trickle and proceed to the "After Filling Transmission" procedure.
6. REFILL TRANSMISSION WITH FLUID
(a) Install the overflow plug.
(b) Stop the engine.
(c) Remove the refill plug.
(d) Add 0.4 liters (0.4 US qts, 0.4 Imp. qts) of fluid.
(e) Allow the engine to idle and wait for 10 seconds.
(f) Proceed to "Check Fluid Level".
7. AFTER FILLING TRANSMISSION
(a) Install the overflow plug with a new gasket.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Stop the engine.
(c) Install the refill plug with a new O-ring.
Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)
(d) Install the transmission case cover with the 2 bolts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)