IS 250C V6-2.5L (4GR-FSE) (2011)
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative(-) battery terminal to disable the SRS system.
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
6. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Removal
7. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal
8. REMOVE SHIFT PADDLE SWITCH
(a) Disconnect the clamp from the steering wheel assembly.
(b) Disconnect the switch wire connector from the steering wheel assembly.
(c) Disconnect the 2 connectors from the 2 shift paddle switches, and remove the switch wire.
Text in Illustration
(d) Remove the 4 screws, 2 brackets and 2 shift paddle switches.
Text in Illustration