IS 250C V6-2.5L (4GR-FSE) (2011)
Installation
A960E AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
(a) Install the check ball body and spring.
Text in Illustration
(b) Check the accumulator pistons, check ball body and spring as shown in the illustration.
Text in Illustration
(c) Align the groove of the manual valve with the pin of the lever.
Text in Illustration
(d) Install the 19 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
Bolt length:
Bolt A
25 mm (0.984 in.)