IS 250C V6-2.5L (4GR-FSE) (2011)
1. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring with ATF and install it to the transmission wire.
Text in Illustration
(b) Install the transmission wire with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the transmission wire connector.
2. CONNECT TRANSMISSION WIRE
(a) Connect the 9 connectors to the solenoid valves.
(b) Install the 2 clamps with the 2 bolts.
Bolt A - Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)
Bolt B - Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Install the ATF temperature sensor and clamp with the bolt.