IS 250C V6-2.5L (4GR-FSE) (2011)
Text in Illustration
(b) Install the O-ring.
(c) Install the oil strainer with the 4 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Install the 3 magnets in the oil pan.
Text in Illustration
(b) Install a new gasket and the oil pan to the transmission case with the 20 bolts.
Torque : 4.4 Nm (45 kgf-cm, 39 in-lbf)
5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY
(a) Install the No. 1 exhaust pipe support bracket sub-assembly with the 4 bolts and 2 nuts.
Bolt A - Torque : 43 Nm (440 kgf-cm, 32 ft-lbf)