IS 250C V6-2.5L (4GR-FSE) (2011)
Perform the same procedure as the LH side.
7. INSTALL REAR DRIVE SHAFT ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Installation
8. INSTALL REAR DRIVE SHAFT ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
9. INSTALL REAR AXLE ASSEMBLY LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear Axle Hub/Installation
10. INSTALL REAR AXLE ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
11. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service
and Repair/Rear Axle Hub/Installation
12. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the RH side.
13. TEMPORARILY TIGHTEN REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for LH Side) See: Drive Axles, Bearings and Joints/Wheel
Hub/Service and Repair/Rear Axle Hub/Installation
14. TEMPORARILY TIGHTEN REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
15. TEMPORARILY TIGHTEN REAR NO. 2 UPPER CONTROL ARM ASSEMBLY (for LH Side) See: Steering and
Suspension/Suspension/Control Arm/Service and Repair/Rear Upper Arm/Installation
16. TEMPORARILY TIGHTEN REAR NO. 2 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
17. INSTALL TOE CONTROL LINK SUB-ASSEMBLY LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear Axle
Hub/Installation
18. INSTALL TOE CONTROL LINK SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
19. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Steering and Suspension/Suspension/Control
Arm/Service and Repair/Rear Lower Arm/Installation
20. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
21. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY See: Body and Frame/Frame/Cross-Member/Rear Cross-Member/Service and
Repair/Installation
22. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
Perform the same procedure as the No. 3 parking brake cable assembly.
23. INSTALL REAR SPEED SENSOR LH See: Drive Axles, Bearings and Joints/Wheel Hub/Service and Repair/Rear Axle Hub/Installation