IS 250C V6-2.5L (4GR-FSE) (2011)
Back Window Glass: Service and Repair
Installation
WINDOW / GLASS: BACK WINDOW GLASS: INSTALLATION
1. INSTALL BACK WINDOW OUTSIDE MOULDING
(a) Apply Primer G to the installation part of a new back window outside moulding.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install the new back window outside moulding onto the back window glass as shown in the illustration.
Text in Illustration
Standard Dimension:
NOTICE:
*
Allow the primer to dry for 3 minutes or more.
*
Do not keep any of the opened Primer G for later use.
*
Do not apply too much primer.
HINT
Use the same procedure for the RH side and the LH side.
2. INSTALL BACK WINDOW GLASS ADHESIVE DAM
(a) Apply Primer G to the installation part of a new back window glass adhesive dam.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install the new back window glass adhesive dam onto the back window glass as shown in the illustration.
Text in Illustration