IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-2550003.png)
Text in Illustration
NOTICE:
*
Do not damage the vehicle body with the knife.
*
If the vehicle body is damaged, repair the damaged portion by applying an anti-rust coating after removing the windshield glass.
(b) Remove the remaining windshield outside moulding from the windshield glass.
NOTICE:
When removing the windshield outside moulding, make a partial cut, and then pull and remove it by hand.
36. REMOVE WINDSHIELD GLASS
(a) Disconnect each connector.
(b) Apply protective tape to the vehicle body around the windshield glass.
Text in Illustration
HINT
Apply protective tape to the vehicle body to prevent it from being scratched.
(c) Pass a piano wire between the vehicle body and glass from the interior.
Text in Illustration
(d) Tie both wire ends to wooden blocks or similar objects.
(e) Cut off the adhesive by pulling the piano wire around the glass.
NOTICE:
