IS 300 L6-3.0L (2JZ-GE) (2001)
5. INSPECT ACCELERATOR PEDAL POSITION SENSOR
a. Disconnect the accelerator pedal position sensor connector.
b. Using an ohmmeter, measure the resistance between terminals VC and E2.
Resistance: 1.2 - 3.2 kohms at 20 °C (68 °F)
If the resistance is not as specified, replace the accelerator pedal position sensor.
c. Reconnect the accelerator pedal position sensor connector.
6. REINSTALL ENGINE COVER
Reinstall the engine cover with the 4 nuts.