IS 350 V6-3.5L (2GR-FSE) (2006)
Navigation Module: Service and Repair
REMOVAL
1. EJECT MAP DISC
a. Turn the engine switch on (ACC).
b. Apply protective tape to the places shown in the illustration.
c. Insert 2 precision screwdrivers (Dia 1.5 or less) into the holes on both sides of the clock assembly at the angle shown in the illustration.
NOTE: Do not pry on the clock assembly with the screwdrivers as it may damage the clock assembly.
HINT: If precision screwdrivers are not available, use in-vehicle tools (part No. 09135-53010).
d. Insert a protective taped screwdriver from the underside of the hazard switch and pull and remove the clock assembly.
NOTE: Do not pry on the hazard switch with the screwdriver as it may damage the switch.