IS 350 V6-3.5L (2GR-FSE) (2006)
e. Remove the No. 1 luggage compartment door name plate.
3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
a. Put protective tape around the No. 3 luggage compartment door plate.
b. Insert a piano wire between the vehicle body and No. 3 luggage compartment door plate.
c. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
d. Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.
NOTE:
-
If reusing the door plate, take care not to damage the No. 3 luggage compartment door plate.
-
Be careful not to damage the vehicle body.
e. Remove the No. 3 luggage compartment door plate.
INSTALLATION
HINT: When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.
NOTE: Do not heat the vehicle body, emblem and name plate excessively.
1. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.