IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-657011.png)
1. INSTALL RADIATOR UPPER TANK AND LOWER TANK
a. Check that there are no foreign objects in the lock plate groove, and install a new O-ring. Make sure that the O-ring is not twisted.
HINT: When cleaning the lock plate groove, lightly rub it with sandpaper without scratching it.
b. Tap the lock plate with a plastic hammer so that there is no gap between the lock plate and tank.
2. ASSEMBLE SST
SST 09230-01010, 09231-14010
a. Install the punch assembly to the overhaul handle, inserting it in the hole in part A as shown in the illustration.
b. While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
Dimension B: 8.4 mm (0.331 inch)
3. CAULK LOCK PLATE
SST 09230-01010
