IS 350 V6-3.5L (2GR-FSE) (2006)
Required Tools & Material
Repair Procedure:
Removal
1.
Remove the cool air intake duct seal by removing the 11 clips.
2.
Remove the V-bank cover sub-assembly.
A.
Hold the front of the V-bank cover and raise it to disengage the 2 clips on the front of the cover.
B.
Continue to raise the cover to disengage the clip on the rear of the cover and remove the cover.
NOTE:
Attempting to disengage both front and rear clips at the same time may cause the cover to break.