IS 350 V6-3.5L (2GR-FSE) (2006)
a. Using SST, loosen the pulley bolt.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
b. Tighten the pulley bolt to 2 or 3 threads of the crankshaft.
c. Using SST, remove the pulley bolt and pulley.
SST 09213-70011 (09213-70020), 09330-00021
HINT: Apply grease to the threads and tip of the SST (center bolt) prior to use.
d. Remove the pulley set key of the key groove.
4. REMOVE TIMING CHAIN CASE OIL SEAL