IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-603001.png)
Variable Valve Timing Actuator Position Sensor: Service and Repair
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE VVT SENSOR (for Intake Side of Bank 1)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
4. REMOVE VVT SENSOR (for Intake Side of Bank 2)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
