IS 350 V6-3.5L (2GR-FSE) (2006)
2.
Remove the cool air intake duct seal by removing the 11 clips.
3.
Remove the engine compartment side cover LH by removing the 5 clips.
4.
Remove the engine compartment side cover RH by removing the 2 clips.
5.
Remove the V-bank cover sub-assembly.
A.
Raise the V-bank cover to disengage the clip on the rear of the cover.
B.
Raise the cover again to disengage the 2 clips on the front of the cover and remove the cover.
NOTE: