IS 350 V6-3.5L (2GR-FSE) (2006)
a. Remove the screw and clamp.
b. Remove the heater radiator unit sub-assembly.
8. REMOVE NO. 1 COOLER EVAPORATOR SUBASSEMBLY
a. Remove the 5 screws.
b. Release the 3 claws and remove the air duct.
c. Remove the No. 1 cooler evaporator sub-assembly from the air duct.
d. Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
REASSEMBLY
1. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY
a. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the cooler evaporator subassembly.
Compressor oil: ND-OIL 8 or equivalent