IS 350 V6-3.5L (2GR-FSE) (2006)
/Page-2103001.png)
Maintenance Required Lamp/Indicator: Service and Repair
Without Navigation System
After Changing The Engine Oil
The oil change system should be reset. Perform the following procedure:
1. Switch the display to the odometer when the engine is running.
2. Turn the engine switch OFF.
3. While pressing the trip meter reset button, set the engine switch to the IG-ON mode (but do not start the engine otherwise the reset mode will be
cancelled). Continue to press and hold the button until the trip meter displays 000000.
