IS 350 V6-3.5L (2GR-FSE) (2006)
Alignment: Service and Repair
Front Wheel Alignment Adjustment
FRONT WHEEL ALIGNMENT ADJUSTMENT
1. INSPECT TIRES
2. MEASURE VEHICLE HEIGHT
a) Bounce the vehicle at the corners up and down to stabilize the suspension and inspect vehicle height.
Vehicle Height 2wd
Vehicle Height 4wd
Measuring points:
A: Ground clearance of front wheel center
B: Ground clearance of front center position of front suspension lower arm assembly front bushing installation bolt head
C: Ground clearance of rear center position of rear No.2 suspension arm bushing installation bolt threads
NOTICE:
^
Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
^
Be sure to perform measurement on a level surface.