IS 350 V6-3.5L (2GR-FSE) (2006)
Tire Pressure Sensor: Service and Repair
TIRE PRESSURE WARNING VALVE AND TRANSMITTER
Components
REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE REAR WHEEL
3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
a) Remove the valve core and cap, and release the air from the tire.
b) After ensuring that a sufficient amount of air has been released, remove the nut and washer that is used to secure the tire pressure warning
valve and transmitter and drop the sensor inside the tire.
HINT: Keep the removed cap, valve core, nut and washer.