IS 350 V6-3.5L (2GR-FSE) (2006)
a. Using SST, install the heated oxygen sensors.
SST 09224-00010
Torque: 40 N.m (408 kgf.cm, 30 ft.lbf)
b. Pass the heated oxygen sensor connectors through the floor panel and install the grommets.
a. Using SST, install the heated oxygen sensors.
SST 09224-00010
Torque: 40 N.m (408 kgf.cm, 30 ft.lbf)
b. Pass the heated oxygen sensor connectors through the floor panel and install the grommets.