IS 350 V6-3.5L (2GR-FSE) (2006)
Accelerator Pedal: Service and Repair
REMOVAL
REMOVE ACCELERATOR PEDAL
a. Disconnect the accelerator pedal position sensor connector.
b. Remove the 2 bolts and accelerator pedal.
NOTE:
-
Avoid physical shock to the accelerator pedal.
-
Do not disassemble the accelerator pedal assembly.
INSTALLATION
NOTE:
-
Avoid physical shock to the accelerator pedal.
-
Do not disassemble the accelerator pedal assembly.
INSTALL ACCELERATOR PEDAL
a. Install the accelerator pedal with the 2 bolts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Connect the accelerator pedal position sensor connector.